3rd-4th Gear Synchronizer: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING
Special Tool(s) / General Equipment
| 205-199 (T83T-3132-A1) Installer, Spindle/Axle Shaft T83-4000-A TKIT-1983-F TKIT-1983-FLM TKIT-1983-FX | |
|---|---|
| 205-D015 (D80L-630-4) Step Plate | |
| 211-014 Remover, Steering Wheel | |
| 307-003 (T57L-500-B) Holding Fixture, Transmission | |
| 307-680 Table, Assembly (DPS6) TKIT-2010D-FLM TKIT-2010D-ROW | |
| 308-847 Installer, Inputshaft Seal | |
| 308-880 Installer, Driveshaft Seal | |
| Hydraulic Press | |
| Hot Air Gun | |
| Punch | |
| Adhesive Tape | |
| Bearing Separator |
Materials
| Name | Specification |
|---|---|
| Motorcraft® Gasket Maker TA-16 | WSK-M2G348-A5 |
| Motorcraft® Dual Clutch Transmission Fluid XT-11-QDC | WSS-M2C200-D2 |
| Motorcraft® Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A |