3rd-4th Gear Synchronizer: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING
Special Tool(s) / General Equipment
| 205-068 Installer, Drive Pinion Bearing | |
|---|---|
| 205-115 Installer, Drive Pinion Seal TKIT-2000-F/FM/FLM | |
| 205-295 Remover, Bearing (Main Tool) | |
| 205-329 Mounting Bracket, Engine/Differential | |
| 303-435 Mounting Stand | |
| 303-435-06 Mounting Bracket for 303-435 | |
| 308-044 Installer, Transmission Extension Housing Bushing/Seal | |
| 308-195 Collet for 205-295 | |
| 308-208 Remover, Halfshaft Seal | |
| 308-214 Remover, Hydraulic Line Spring Clip | |
| 308-230 Support Plate, Gear Removal (Dia 85.1 mm) | |
| Hydraulic Press | |
| Vise Jaw Protectors |
Materials
| Name | Specification |
|---|---|
| Motorcraft® Gasket Maker TA-16 | WSK-M2G348-A5 |
| Motorcraft® Dual Clutch Transmission Fluid XT-11-QDC | WSS-M2C200-D2 |