Clutch Slave Cylinder - 6-Speed Manual Transmission - MMT6: Removal
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the transmission. Refer to: Transmission - 2.0L EcoBoost (184kW/250PS) - MI4 .
- Remove the retainer and remove the clutch bleeder.
- Remove the bolts and remove the slave cylinder.
Torque
: 97 lb.in (11 Nm)