Powertrain Control Module (PCM): Installation
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse the removal procedure.
Vehicles with PCM security shield
- Tighten the shear bolt until the head is sheared off.
All vehicles
-
NOTE: This step is only necessary when installing a new component.
Upload the module information from the diagnostic tool to the module using the Programmable Modules Installation routine. Use the General Equipment: Ford Diagnostic Equipment
- After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure.