LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1532 (Electronic Engine Controls - 2.3L ECOBOOST (257KW/350PS) - Mi4) >> Removal And Installation >> Manifold Absolute Pressure and Temperature (MAPT) Sensor >> Removal

Manifold Absolute Pressure and Temperature (MAPT) Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the engine appearance cover.
    GFD264606Courtesy of FORD MOTOR COMPANY
  2. Disconnect the electrical connector and remove the MAPT sensor.

    Torque

    : 44 lb.in (5 Nm)

GFD267378Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals