LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1530 (Electronic Engine Controls - 2.0L DURATEC-He (125KW/170PS) - Mi4) >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation

Powertrain Control Module (PCM): Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation (PMI) procedure. Refer to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION . Use the General Equipment: Ford Diagnostic Equipment

  3. Reprogram the PATS Refer to: Passive Anti-Theft System (PATS) Parameter Reset Vehicles Without: Keyless Entry and Push Button Start . Refer to: PASSIVE ANTI-THEFT SYSTEM (PATS) PARAMETER RESET Vehicles With: Keyless Entry and Push Button Start .
  4. After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure.
scientia non olet · About LEMON Manuals