LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1525 (Electronic Engine Controls - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Engine Coolant Temperature (ECT) Sensor >> Removal

Engine Coolant Temperature (ECT) Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the engine appearance cover.
    GFD264596Courtesy of FORD MOTOR COMPANY
  2. NOTE: Be prepared to collect escaping fluid.

    • Disconnect the electrical connector.

    • Remove the retaining spring clip.

    • Remove the ECT sensor.

GFD267311Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals