LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1525 (Electronic Engine Controls - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Cylinder Head Temperature (CHT) Sensor >> Removal

Cylinder Head Temperature (CHT) Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the turbocharger. Refer to: Turbocharger .
  2. Disconnect the electrical connector and the harness retainer. Remove the CHT sensor.

    Torque

    : 106 lb.in (12 Nm)

GFD267310Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals