LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1525 (Electronic Engine Controls - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Crankshaft Position (CKP) Sensor >> Removal

Crankshaft Position (CKP) Sensor: Removal

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
  2. Remove the underbody shield.
    GFD264388Courtesy of FORD MOTOR COMPANY
  3. Disconnect the CKP sensor electrical connector, remove the retainer and the sensor.

    Torque

    : 89 lb.in (10 Nm)

GFD267309Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals