Ignition Coil-On-Plug: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Visual check. Inspect the ignition coil-on-plug rubber boot assembly for cracks, rips, or tears. Replace any damaged ignition coil-on-plug rubber boots.

To install, slide the new ignition coil-on-plug boot onto the ignition coil until it is fully seated at the top of the ignition coil-on-plug.

Courtesy of FORD MOTOR COMPANY
To install, reverse the removal procedure.