Pinpoint Test C : P0615: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Starting System for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Starting System - Overview .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0615 | Starter Relay Circuit | This DTC is set when the PCM detects a fault in the starter relay control circuit(s). |
Possible Sources
- Wiring, terminals or connectors
- PCM
Visual Inspection and Diagnostic Pre-checks
- Inspect BJB fuse 13 (30A).