LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1510 (Fuel Charging And Controls - Turbocharger - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> Turbocharger Coolant Supply Tube >> Installation

Turbocharger Coolant Supply Tube: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install and connect the turbocharger coolant supply tube and the hose clamp. Use the General Equipment: Hose Clamp Remover/Installer
    GFD267089Courtesy of FORD MOTOR COMPANY
  2. Connect the turbocharger coolant supply tube and the hose clamp. Use the General Equipment: Hose Clamp Remover/Installer
    GFD267088Courtesy of FORD MOTOR COMPANY
  3. Fill and bleed the cooling system. Refer to: COOLING SYSTEM DRAINING, VACUUM FILLING AND BLEEDING .
scientia non olet · About LEMON Manuals