LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1506 (Fuel Charging And Controls - 1.0L ECOBOOST (92KW/125PS)) >> Removal And Installation >> High-Pressure Fuel Pump Drive Unit >> Removal

High-Pressure Fuel Pump Drive Unit: Removal

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve cover. Refer to: VALVE COVER .
  2. NOTE: Use a heat gun to soften the sealant, this will aid in the removal of the high-pressure fuel pump drive unit. Failure to follow these directions may result in damage to the high-pressure fuel pump drive unit.

    Remove the high-pressure fuel pump drive unit bolts and then remove the high-pressure fuel pump drive unit.

GFD266935Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals