Removal And Installation: Radiator: Removal
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the following items:
- Refer to: Air Cleaner .
- Refer to: Charge Air Cooler (CAC) .
- Refer to: Cooling System Draining, Vacuum Filling and Bleeding .
- Use the General Equipment: Hose Clamp Remover/Installer
- Use the General Equipment: Cable Ties
- Refer to: Jacking and Lifting - Overview .
-
NOTE: Only tighten the bolts finger tight at this stage.
- Use the General Equipment: Vehicle/Axle Stands
- Use the General Equipment: Hose Clamp Remover/Installer
-
NOTE: Make sure that no strain is placed on the refrigerant lines.
- Use the General Equipment: Cable Ties
Remove the following items:
- Use the General Equipment: Cable Ties