Oil Cooler: Removal

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Refer to: Battery Disconnect and Connect .

Courtesy of FORD MOTOR COMPANY

Courtesy of FORD MOTOR COMPANY

Courtesy of FORD MOTOR COMPANY
1. Torque
  : 106 lb.in (12 Nm)
2. Torque
  : 159 lb.in (18 Nm)
Courtesy of FORD MOTOR COMPANY
1. Use the General Equipment: Hose Clamp(s)
2. NOTE: Make sure that the mating faces are clean and free of foreign material.
  
  Torque
  
  :Stage 1: 17 lb.ft (23 Nm) Stage 2: 75°Stage 3: 15°
3. NOTE: Be prepared to collect escaping fluid.
  
  Use the General Equipment: Hose Clamp Remover/Installer

Courtesy of FORD MOTOR COMPANY