Valve Stem Seals: Installation
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Lubricate the valve seal with clean engine oil prior to installing.
Install the valve seal. Use Special Service Tool: 303-470 (T94P-6510-CH) Installer, Valve Stem Oil Seal.
Material
: Motorcraft® SAE 5W-20 Synthetic Blend Motor Oil / XO-5W20-QSP (WSS-M2C945-A)
- Install the valve spring. Refer to: Valve Springs .
- Repeat the appropriate removal and installation steps for all of the other cylinders.