Engine Mount: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Tighten the engine mount studs.
Torque

: 93 lb.in (10.5 Nm)

Courtesy of FORD MOTOR COMPANY
- Install the engine mount and the nuts.
  Torque
  
  : 59 lb.ft (80 Nm)
- Install the engine mount bolts.
  Torque
  
  : 66 lb.ft (90 Nm)
Courtesy of FORD MOTOR COMPANY
Position back the degas bottle and connect the tabs.

Courtesy of FORD MOTOR COMPANY
Install the underbody shield and the retainers.

Courtesy of FORD MOTOR COMPANY