LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1499 (Engine - 2.0L ECOBOOST (184KW/250PS) - Mi4) >> Removal And Installation >> Valve Springs >> Installation

Valve Springs: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Using some multi-purpose grease and a small screwdriver will aid in the installation of the valve collet. Check the seating of the valve collet.

    1. Install the valve spring, the valve spring retainer and the valve collet.
    2. Disconnect the compressed air supply.
    3. Repeat the appropriate installation steps for all of the other cylinders. Use Special Service Tool: 303-300 (T87C-6565-A) Set, Valve Spring Compressor., 303-350 (T89P-6565-A) Compressor, Valve Spring., 303-472 (T94P-6565-AH) Adapter, Valve Spring Compressor., 303-1249 Valve Spring Compressor.

      Material

      : Motorcraft® Multi-Purpose Grease Spray / XL-5-A (ESB-M1C93-B)

    GFD266113Courtesy of FORD MOTOR COMPANY
  2. Install the following items:

    1. Refer to: SPARK PLUGS .
    2. Refer to: Valve Tappets  .

scientia non olet · About LEMON Manuals