Engine Mount: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
Tighten the RH engine mount studs.
Torque

: 89 lb.in (10 Nm)

Courtesy of FORD MOTOR COMPANY
1. Install the RH engine mount and the nuts.
  Torque
  
  : 85 lb.ft (115 Nm)
2. NOTE: Only tighten the bolts finger tight at this stage.
  
  Install the RH engine mount bolts finger-tight.
Courtesy of FORD MOTOR COMPANY
Release the jack. Use the General Equipment: Trolley Jack. Use the General Equipment: Wooden Block

Courtesy of FORD MOTOR COMPANY
Tighten the RH engine mount bolts.
Torque

: 66 lb.ft (90 Nm)

Courtesy of FORD MOTOR COMPANY