LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1496 (Steering Wheel And Column Electrical Components (Except Electric)) >> Description And Operation >> Steering Wheel and Column Electrical Components - System Operation and Component Description >> Component Description >> Body Control Module (BCM) - Push Button Start

Body Control Module (BCM) - Push Button Start

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

The BCM determines the vehicle ignition mode based on the start/stop switch input, the BPP input (automatic transmission) or CPP input (manual transmission) and RFA module messages. The BCM communicates the ignition mode to the other modules over the MS-CAN and HS-CAN. The BCM monitors the start/stop switch input and the ignition mode outputs, if a fault is detected in the ignition system, Diagnostic Trouble Codes (DTCs) are set in the BCM. For information on the BCM, Refer to: Module Controlled Functions - Overview .

scientia non olet · About LEMON Manuals