Front Brake Disc - RS: Removal
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the wheel and Tire. Refer to: Wheel and Tire .
-
NOTE: Do not allow the brake caliper to hang from the brake hose or damage to the hose can occur.NOTE: Make sure that new bolts are installed.
Remove the bolts and position aside the brake caliper. Discard the bolts.
Torque
:Stage 1: 85 lb.ft (115 Nm) Stage 2: 90°
- Remove the brake disc.