Outer Constant Velocity (CV) Joint Boot - 2.0L EcoBoost (184kW/250PS) - MI4: Installation
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Grease sachet is supplied with boot kit.
Install the outer CV boot and apply grease to the inside of the CV boot.
- Using the special tool, install the new CV boot clamps. Use Special Service Tool: 205-343 (T95P-3514-A) Installer, Constant Velocity Joint Boot Clamp.
- Install the inner CV joint boot. Refer to: Inner Constant Velocity (CV) Joint Boot - 2.0L EcoBoost (184kW/250PS) - MI4 .