LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1481 (Vehicle Dynamic Suspension (Except Electric)) >> Description And Operation >> Vehicle Dynamic Suspension - System Operation and Component Description >> Network Message Chart

Network Message Chart

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Module Network Input Messages - GFM2 

Broadcast Message Originating Module Message Purpose
Drive mode selection IPC This message is first sent to the BCM over the MS-CAN. This message informs the GFM2 of the current message center selected vehicle mode; Normal, Sport, Track or Drift. The GFM2 has preprogrammed PWM outputs for each drive mode.
Power mode BCM This message provides the GFM2 with the current vehicle power mode; key out, key recently out, key approved, post accessory, accessory, post ignition, ignition ON, running or cranking.
scientia non olet · About LEMON Manuals