Upper Arm: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

1. Position the correct spacer.
2. Verify the spacer is placed properly. Use the General Equipment: Vehicle/Axle Stands
Courtesy of FORD MOTOR COMPANY
Install the upper arm and install the new upper arm-to-rear subframe bolt.
Torque

: 94 lb.ft (127 Nm)

Courtesy of FORD MOTOR COMPANY
Position the upper arm and the brake hose bracket and install the new upper arm-to-trailing arm bolt.
Torque

: 85 lb.ft (115 Nm)

Courtesy of FORD MOTOR COMPANY
Position the rear shock absorber and install the new rear shock absorber lower bolt.
Torque

: 85 lb.ft (115 Nm)

Courtesy of FORD MOTOR COMPANY
Install the spring. Refer to: Spring .