Front Lower Arm - RS: Removal
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.
- Remove the spring. Refer to: Spring .
- Finger tight only.
- Fabricate a spacer.
-
NOTE: The forward lower arm is marked FRONT. Make a note of the position of the front lower arm to aid installation.