Front Suspension - Overview: Overview
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
The front suspension consists of the following components:
- Lower arms
- Stabilizer bar, bushings and links
- Strut and spring assemblies
- Wheel bearings
- Wheel hubs
- Wheel knuckles
- Wheel studs
The front suspension uses a MacPherson strut system. This suspension system incorporates a strut assembly that takes the place of the upper arm and ball joint. The strut performs the function of a shock absorber and is encompassed by a coil spring. The strut and spring assembly carries the sprung weight of the vehicle and is also the pivot point for the steering knuckle. This system uses a lower control arm and ball joint for the lower (unloaded) pivot point of the steering knuckle.