LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1230 (Engine - 2.0L ECOBOOST (177KW/240PS) - Mi4) >> Disassembly And Assembly Of Subassemblies >> Piston >> Assembly

Disassembly And Assembly Of Subassemblies: Piston: Assembly

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Align the piston-to-connecting rod orientation marks made during disassembly.

    Install the piston to the connecting rod.

    GFD227886Courtesy of FORD MOTOR COMPANY
  2. Lubricate with clean engine oil and install the piston pin.

    Material: motorcraft ® SAE 5w-30 synthetic blend motor oil / XO-5W30-QSP (WSS-M2C946-A)

    GFD227887Courtesy of FORD MOTOR COMPANY
  3. Install new piston pin retainers.
    GFD227888Courtesy of FORD MOTOR COMPANY
  4. Lubricate with clean engine oil and install new piston rings.

    Material: motorcraft ® SAE 5w-30 synthetic blend motor oil / XO-5W30-QSP (WSS-M2C946-A)

    GFD227889Courtesy of FORD MOTOR COMPANY
  5. NOTE: Align the piston rings on the piston.

    1. Upper oil control segment ring gap location.
    2. Oil control spacer gap location.
    3. Lower oil control segment ring gap location.

GFD227890Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals