Rear Brake Flexible Hose: Removal
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur. If brake fluid is spilled onto a painted or plastic surface, immediately wash the surface with water.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: Wheel and Tire .
- Torque:
Brake tube fitting: 133 lb.in (15 Nm)
Brake hose bracket bolt: 97 lb.in (11 Nm)
- Torque: 22 lb.ft (30 Nm)