Rear Wheel Bearing and Wheel Hub - FWD: Removal
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.
- Remove the brake disc. Refer to: Brake Disc .
- Remove the wheel speed sensor connector and position the wheel speed sensor aside.
- Remove and discard the wheel bearing and wheel hub retainers and remove the wheel bearing and wheel hub.