LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1208 (Rear Suspension System) >> Removal And Installation >> Rear Front Lower Arm LH >> Removal

Rear Front Lower Arm LH: Removal

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Wheel and Tire .
  2. Use the General Equipment: Vehicle/Axle Stands
    GFD227058Courtesy of FORD MOTOR COMPANY
  3. NOTE: Tighten the suspension bushing fasteners with the suspension loaded or with the weight of the vehicle resting on the wheels and tires, otherwise incorrect clamp load and bushing damage may occur.

    Torque: 129 lb.ft (175 Nm)

GFD227059Courtesy of FORD MOTOR COMPANY