LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1198 (Automatic Transmission - 6F35) >> Removal And Installation >> Selector Shaft Seal >> Removal

Selector Shaft Seal: Removal

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the TR sensor. REFER to: Transmission Range (TR) Sensor .
  2. Remove and discard the selector shaft seal. Use the General Equipment: Flat Headed Screw Driver
GFD228910Courtesy of FORD MOTOR COMPANY