Powertrain Control Module (PCM): Installation

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
NOTE: This step is only necessary when installing a new component.

Upload the module information from the diagnostic tool using the Programmable Modules Installation routine. Use the General Equipment: Ford Diagnostic Equipment
- Upload the module information from the diagnostic tool using the Programmable Modules Installation routine. Refer to: Module Configuration - System Operation and Component Description .
- Reprogram the PATS. Carry out the Parameter Reset procedure. Refer to: Anti-Theft Key Programming - Scan Tool .
After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure.