Pinpoint Test P : U0212:00: Notes
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The PAM communicates with the SCCM through the High Speed Controller Area Network 1 (HS1-CAN), High Speed Controller Area Network 2 (HS2-CAN) and GWM.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0212:00 | Lost Communication With Steering Column Control Module: No Sub Type Information | Sets in continuous memory in the PAM if expected messages from the SCCM are missing for 5 seconds or more. |
Possible Sources
- Communication concern
- GWM concern
- SCCM
- PAM (integral to the BCM)