Pinpoint Test C : B129C:96, B129D:96: Notes
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
The PAM continuously monitors the active park assist sensor signals any time the ignition is on.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129C:96 | Left Front Side Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the left front active park assist sensor has internally failed or has an incorrect attenuation time. |
| B129D:96 | Right Front Side Sensor: Component Internal Failure | A continuous and on-demand DTC that sets when the right front active park assist sensor has internally failed or has an incorrect attenuation time. |
Possible Sources
- Active park assist sensor
- PAM (integral to the BCM)
NOTE:
Before disconnecting any of the active park assist sensors, verify the connectors are properly seated and latched.