Pinpoint Test A : B129C:12, B129D:12: Notes
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Audio System/Navigation - With THX for schematic and connector information.
Normal Operation and Fault Conditions
The PAM continuously monitors the active park assist sensor signals any time the ignition is on.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129C:12 | Left Front Side Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the left front active park assist sensor signal circuit is shorted to battery voltage. |
| B129D:12 | Right Front Side Sensor: Circuit Short To Battery | A continuous and on-demand DTC that sets when the right front active park assist sensor signal circuit is shorted to battery voltage. |
Possible Sources
- Wiring, terminals or connectors
- Active park assist sensor
- PAM (integral to the BCM)
NOTE:
Before disconnecting any of the active park assist sensors, verify the connectors are properly seated and latched.