Liftgate Trim Panel: Removal
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
- Release the clips and remove the center upper liftgate trim panel.
-
NOTE: RH side shown, LH side similar.
On both sides. Release the clips and remove the liftgate upper side trim panels.
- Remove the grab handle cover.
Vehicles with power liftgate
- Remove the retainers, release the clips, disconnect the electrical connector and remove the liftgate trim panel.
All vehicles
- Remove the retainers, release the clips and remove the liftgate trim panel.