Front Door Trim Panel: Removal
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH side shown, RH side similar.
- Remove the front door trim panel upper bolt cover.
- Remove the front door trim panel upper bolt.
Torque: 19 lb.in (2.2 Nm)
- Remove the front door window control switch. Refer to: Front Door Window Control Switch .
- Remove the front door trim panel center bolt.
Torque: 48 lb.in (5.4 Nm)
- Remove the 2 front door trim panel lower screws.
- Release the front door trim panel clips.
-
- Disconnect the latch cable.
- Disconnect the power lock switch.
- If equipped, disconnect the ambient lighting electrical connector and remove the front door trim panel.