LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1184 (Instrument Panel And Console) >> Removal And Installation >> Instrument Panel >> Installation

Instrument Panel: Installation

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Fill and bleed the cooling system. Refer to filling and bleeding without a vacuum cooling system filler. Refer to: Cooling System Draining, Vacuum Filling and Bleeding 2.0L EcoBoost (177kW/240PS) - MI4 or Cooling System Draining, Vacuum Filling And Bleeding 2.3L EcoBoost (201kW/273PS) .
  3. NOTE: Anytime the parking brake switch electrical connector has been disconnected, the EPB system is deactivated and a DTC is stored in the ABS module. Perform the following step to restore the EPB system and clear the ABS module DTC.

    Apply and release the parking brake twice within 5 seconds, pausing with the switch in the NEUTRAL position for approximately one-half second between each apply and release.