Rear Spoiler: Removal
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Removal steps in this procedure may include installation details.
- On both sides.
- Torque: 55 lb.in (6.2 Nm)
-
NOTE: Use care to avoid breaking retainer tabs.NOTE: Follow unique instructions or graphics for this step in the installation.
On both side Use the General Equipment: Interior Trim Remover
-
NOTE: This step is only required if reusing the rear window glass
On both side Remove acrylic foam or adhesive residue by hand or with the aid of a plastic scraper. Use the General Equipment: Plastic Scraper
-
NOTE: Disconnect the rear washer hose after rear spoiler is separated from liftgate.
Release clips starting at corner and work toward center of spoiler.