Blower Motor: Removal
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the accelerator pedal. Refer to: Accelerator Pedal .
- Remove the air inlet duct. Refer to: Air Inlet Duct .
- Disconnect the electrical connector.
- Release the retaining clip holding the blower motor while an assistant from the passenger side compartment reaches through the blower motor cage and turns the blower motor housing 45 degrees clockwise to release and remove the blower motor.