Rear Seat Cushion: Removal

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

On both sides, release the 2 locking tabs and clip. Remove the seat front finish panels.

Courtesy of FORD MOTOR COMPANY
Remove the 2 seat cushion-to-floor retainers.
Torque: 41 lb.ft (55 Nm)

Courtesy of FORD MOTOR COMPANY
1. If equipped with heated seats, disconnect the 2 electrical connectors.
2. Disconnect the seat cushion harness electrical connector.
3. Remove the seat cushion.

Courtesy of FORD MOTOR COMPANY