Rear Seat Backrest: Removal
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH seat shown, RH seat similar.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the rear seat cushion. Refer to: Rear Seat Cushion .
- Fold the seat backrest forward and position the cargo area load floor rearward. Remove the rear seat backrest-to-floor retainers.
Torque: 52 lb.ft (70 Nm)
-
NOTE: The rear seat backrest-to-floor front retainers are shared with safety belt buckles and anchors.
Remove the seat backrest-to-floor front retainers. Remove the seat backrest.
Torque: 52 lb.ft (70 Nm)