Rear Door Window Control Switch: Removal
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH shown, RH similar.
- Remove the rear door window control switch.
- Using the interior trim remover, release the rear door window control switch rear retaining clip. Use the General Equipment: Interior Trim Remover
- Using the interior trim remover, release the rear door window control switch front retaining clip. Use the General Equipment: Interior Trim Remover
- Disconnect the electrical connector and remove the rear door window control switch.
-
NOTE: This step is only necessary when installing a new component.
Remove the rear door window control switch from the bezel.
- Release the rear door window control switch rear retaining tabs.
- Remove the rear door window control switch from the bezel.