LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1168 (Exterior Lighting System) >> Diagnosis And Testing >> Turn Signal and Hazard Lamps >> Pinpoint Tests >> Pinpoint Test B : One Turn Signal Lamp Is Inoperative Or Always On >> Notes

Pinpoint Test B : One Turn Signal Lamp Is Inoperative Or Always On: Notes

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Turn Signal/Stop/Hazard Lamps for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Exterior Lighting - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B123A:11 Left Front Turn Indicator: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the LH front turn lamp voltage supply circuit.
B123A:15 Left Front Turn Indicator: Circuit Short To Battery Or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the LH front turn lamp voltage supply circuit.
B123B:11 Right Front Turn Indicator: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the RH front turn lamp voltage supply circuit.
B123B:15 Right Front Turn Indicator: Circuit Short To Battery Or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the RH front turn lamp voltage supply circuit.
B1247:11 Left Rear Turn Indicator: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the LH rear turn lamp voltage supply circuit.
B1247:15 Left Rear Turn Indicator: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the LH rear turn lamp voltage supply circuit.
B1248:11 Right Rear Turn Indicator: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the RH rear turn lamp voltage supply circuit.
B1248:15 Right Rear Turn Indicator: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the RH rear turn lamp voltage supply circuit.
B1265:01 Left Rear Turn Lamp Feedback: General Electrical Failure A continuous memory and on-demand DTC that sets when the BCM detects an electrical failure from the LH rear turn lamp outage circuit when the turn lamp is activated.
B1266:01 Right Rear Turn Lamp Feedback: General Electrical Failure A continuous memory and on-demand DTC that sets when the BCM detects an electrical failure from the RH rear turn lamp outage circuit when the turn lamp is activated.
B1497:01 Left Front Turn Lamp Feedback: General Electrical Failure A continuous memory and on-demand DTC that sets when the BCM detects an electrical failure from the LH rear turn lamp outage circuit when the turn lamp is activated.
B1498:01 Right Front Turn Lamp Feedback: General Electrical Failure A continuous memory and on-demand DTC that sets when the BCM detects an electrical failure from the RH rear turn lamp outage circuit when the turn lamp is activated.
B14B4:11 Left Turn Lamps: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the LH turn lamp voltage supply circuits.
B14B4:15 Left Turn Lamps: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the LH turn lamp voltage supply circuits.
B14B5:11 Right Turn Lamps: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the RH turn lamp voltage supply circuits.
B14B5:15 Right Turn Lamps: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the RH turn lamp voltage supply circuits.
B1D06:11 Left Turn Indicator: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the DDM detects an open or short to voltage from the LH exterior mirror turn lamp voltage supply circuit.
B1D07:11 Right Turn Indicator: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the PDM detects an open or short to voltage from the RH exterior mirror turn lamp voltage supply circuit.

Possible Sources