LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1168 (Exterior Lighting System) >> Diagnosis And Testing >> Stoplamps >> Pinpoint Tests >> Pinpoint Test B : One Or More STOPLAMPS Are Inoperative >> Notes

Pinpoint Test B : One Or More STOPLAMPS Are Inoperative: Notes

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Turn Signal/Stop/Hazard Lamps for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Exterior Lighting - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B1115:11 High Mounted Stop Lamp Control: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the high mounted stoplamp voltage supply circuit.
B1115:15 High Mounted Stop Lamp Control: Circuit Short To Battery Or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the high mounted stoplamp voltage supply circuit.
B132B:14 Left Stop/Turn Lamp: Circuit Short To Ground or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to ground from the LH rear stoplamp voltage supply circuit.
B132C:14 Right Stop/Turn Lamp: Circuit Short To Ground or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to ground from the RH rear stoplamp voltage supply circuit.
B1444:11 Left Rear Stop/Position Lamp Output: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the LH rear stoplamp voltage supply circuit.
B1444:15 Left Rear Stop/Position Lamp Output: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the LH rear stoplamp voltage supply circuit.
B1448:11 Right Rear Stop/Position Lamp Output: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the right RH stoplamp voltage supply circuit.
B1448:15 Right Rear Stop/Position Lamp Output: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the right RH stoplamp voltage supply circuit.
B14A0:11 Left Tailgate/Liftgate Lamps: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the LH rear stoplamp voltage supply circuit.
B14A0:15 Left Tailgate/Liftgate Lamps: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the LH rear stoplamp voltage supply circuit.
B14A1:11 Right Tailgate/Liftgate Lamps: Circuit Short To Ground A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the right RH stoplamp voltage supply circuit.
B14A1:15 Right Tailgate/Liftgate Lamps: Circuit Short To Battery or Open A continuous memory and on-demand DTC that sets when the BCM detects an open or short to voltage from the right RH stoplamp voltage supply circuit.

Possible Sources