Turn Signal and Hazard Lamps
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
The turn lamp system consists of:
- Front turn lamps (part of the headlamp assembly)
- Rear lamp assemblies
- Auxiliary rear turn lamps (part of the rear side marker lamps)
- Outside rear view mirrors
- LH multifunction switch
- Hazard flasher lamp switch (integrated into the FCIM)
- BCM
- SCCM
- DDM
- PDM
When the LH multifunction switch is placed in the LH TURN or RH TURN position, the corresponding turn lamps flash on and off.
When the hazard function is active, all the turn lamps flash on and off.
When the LH or RH turn signal is selected and the liftgate is closed, voltage is supplied to the rear lamps mounted to the liftgate. When the LH or RH turn signal is selected and the liftgate is open, the rear lamps mounted on the liftgate turn off and voltage is supplied to the auxiliary rear turn lamps (part of the rear side marker lamps).