Hood Latch: Removal

WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Disconnect the hood latch release cables and if equipped, disconnect the hood ajar switch electrical connector.
1. Disconnect the hood latch release cable.
2. Disconnect the secondary hood latch release cable.
3. If equipped. Disconnect the hood ajar switch electrical connector and position aside the wiring harness.
Courtesy of FORD MOTOR COMPANY
Remove the bolts and remove the hood latch.
Torque: 80 lb.in (9 Nm)

Courtesy of FORD MOTOR COMPANY