Component Description: RGTM
WARNING: This page is about a different car, the 2018 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
The RGTM sends a voltage signal to the exterior liftgate release switch. When the switch is pressed, the signal is routed to ground, indicating a request to release the liftgate latch.
The RGTM also receives a messages from the BCM upon a valid request from the passive entry system or a RKE transmitter.
The RGTM controls liftgate latch release based on the inputs it receives.
The RGTM does not require PMI when it is replaced.