Pinpoint Test A : All DIMMABLE Illumination Does Not Dim: Notes
Diagnostic Overview
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in Service Information for information about these practices.
Refer to Wiring Diagrams Cell 71 , Cluster and Panel Illumination for schematic and connector information.
Normal Operation and Fault Conditions
Refer to Instrument Cluster and Panel Illumination .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1124:09 | Lamp Fade Control: Component Failure | Sets in continuous memory and on-demand when the SCCM detects a short to ground from the instrument panel dimmer switch up, down, or courtesy lamp request input circuits for more than 2 minutes. |
Possible Sources
- Wiring, terminals or connectors
- Instrument panel dimmer switch
- SCCM