LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2017 >> MKT Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center And Warning Chimes >> Description And Operation >> Warning Chimes >> System Operation >> Network Message Chart

Network Message Chart

Module Network Input Messages - IPC 

Broadcast Message Originating Module Message Purpose
Adaptive cruise control warning C-CM Input used to control adaptive cruise control high priority warning chime.
Stability-traction control warning request ABS module Input used to control the service AdvanceTrac ® warning chime.
Belt-Minder ® warning request RCM Input used to control the Belt-Minder ®.
Adaptive cruise control message display PCM Input used to control adaptive cruise control low priority warning chime.
Cross traffic information SOD-L Input used to control the BLIS ® /CTA chime.
Cross traffic information SOD-R Input used to control the BLIS ® /CTA chime.
Driver alert warning IPM-A Input used to control the lane departure hands off chime.
Drivers door ajar status BCM Provides the driver door ajar input to control the door ajar warning chime.
Forward collision warning chime request C-CM Input used to control the forward collision warning chime.
Headlamps on warning chime command BCM Input used to control the headlamps on chime.
Ignition status BCM Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting.
Key-in-ignition warning chime command BCM Input used to control the key-in-ignition warning chime.
Lane assist warning IPM-A Input used to control the hands off lane departure warning chime and the message center hands off warning message display.
Left rear door ajar status BCM Provides the left rear door ajar input to control the door ajar warning chime.
Liftgate/luggage compartment lid ajar status BCM Provides the luggage compartment lid ajar input to control the door ajar warning chime.
Memory feedback request DSM Provides the chime request and update chime request inputs to control the memory feedback warning chime.
Parking aid audible warning status PAM Input used to control the active park assist chime.
Parking aid audible warning status front PAM Input used to control the active park assist chime.
Parking aid audible front target warning PAM Input used to control the active park assist chime.
Park brake chime request BCM Input used to control the parking brake warning chime.
Passenger door ajar status BCM Provides the passenger door ajar input to control the door ajar warning chime.
Passenger rear door ajar status BCM Provides the right rear door ajar input to control the door ajar warning chime.
Perimeter alarm chime request BCM Input used to control the perimeter alarm chime.
Safety belt warning chime request RCM Input used to control the safety belt warning chime.
Steering wheel switch turn signal SCCM Input used to control the turn signal left on warning chime.
Turn indicator command BCM Provides combined messages to control the RH/LH and hazard turn chime tone (tick-tock).
Vehicle speed PCM Input used to control the overspeed warning chime.